CurrentRS provides Enphase microinverter replacement, IQ Gateway troubleshooting, low production diagnostics, and monitoring issue resolution for residential Enphase systems in Delaware, Pennsylvania, New Jersey, and Maryland.
Yes — CurrentRS helps homeowners with Enphase microinverter and IQ Gateway issues across Delaware, Pennsylvania, New Jersey, and Maryland. We review your Enlighten production data before scheduling any roof visit so we know exactly what needs to be replaced.
Enphase microinverter systems distribute the inverter function to each individual panel. This means failures are isolated by design — a failed microinverter only affects the panel it's attached to, not the entire array. But multiple failed microinverters, or an IQ Gateway failure, can cause meaningful production loss or complete monitoring blackouts. CurrentRS identifies exactly which components have failed before any replacement work begins.
Each panel has its own microinverter — the system architecture differs fundamentally from string inverter systems.
In an Enphase system, each solar panel has a microinverter physically attached to its underside. The microinverter converts DC power from that panel directly to AC on the roof. All panels operate independently — shading, soiling, or failure on one panel doesn't reduce production from others. The IQ Gateway collects data from all microinverters using powerline communication and sends production data to the Enlighten monitoring platform via Wi-Fi or cellular.
Failed microinverters show up clearly in the Enlighten monitoring portal as panels with zero production.
The Enlighten app displays per-panel production in real time. A microinverter that has failed electrically shows as a panel producing zero power while neighboring panels are producing normally. Microinverters can fail due to manufacturing defects, thermal stress from improper installation, moisture ingress, or simply age. Older M-series microinverters (pre-IQ) are more prone to failure than current IQ-series units.
CurrentRS reviews your Enlighten production data to identify all failed units before scheduling a roof visit. This makes the repair efficient — we know exactly which panels to access before going on the roof.
The IQ Gateway is the brain of the monitoring system — when it fails, the whole system appears dark even if panels are producing.
If your Enlighten app shows no data at all from any panel, the most likely cause is an IQ Gateway problem — not necessarily a microinverter failure. The IQ Gateway can lose its network connection, lose power from a tripped breaker, or fail as a hardware unit. CurrentRS diagnoses IQ Gateway issues, restores network connectivity where possible, and replaces the hardware when necessary. Learn more about solar system service →
A system producing noticeably less than expected may have multiple failed microinverters that accumulated over time.
Homeowners don't always notice when individual microinverters fail because the system keeps producing — just from fewer panels. Over months, several quiet failures can add up to meaningful production loss. CurrentRS reviews the production history panel-by-panel to identify any units that have stopped reporting or are producing significantly below their neighbors, building a complete picture of system health before scheduling any repair work.
Replacing an Enphase microinverter requires accessing the panel on the roof and swapping the unit underneath.
CurrentRS accesses the affected panel(s) on the roof, disconnects the failed microinverter from the panel's wiring trunk cable and from the panel itself, installs a compatible replacement IQ-series unit, reconnects, and confirms the new unit is reporting to the Enlighten portal. IQ7 and IQ8-series replacements are straightforward. Older M-series replacement may require additional wiring adapter work depending on the original installation configuration. Learn about broader inverter replacement options →
Serving Delaware, Pennsylvania, New Jersey, and Maryland.